N6K-C6001-64T - Cisco Nexus 6000 Chassis Bundle - Refurb'd
Manufacturer: Cisco
Manufacturer Part #: N6K-C6001-64T
Condition: REFURBISHED
Availability: Stock Available - May Be Limited
Cisco Nexus 6000 Switch - L3 - managed - 48 x 10GBase-T + 4 x 40 Gigabit QSFP+ - rack-mountable - AC 100/230 V
The Cisco Nexus 6001T switch is a 1 RU 10 and 40 Gigabit Ethernet switch offering wire-speed performance for up to sixty-four 10 Gigabit Ethernet ports (using Quad Small Form-Factor Pluggable breakout cables) for Ethernet and FCoE traffic, with an overall throughput of 1.28 terabits per second. The Cisco Nexus 6001T offers 48 fixed 1/10G BASE-T and four 40 Gigabit Ethernet QSFP+ ports. Each 40 Gigabit Ethernet port can be split into four 10 Gigabit Ethernet ports using a QSFP breakout cable. The Cisco Nexus 6001T delivers low port-to-port latency of approximately 3.3 microsecond and low jitter independent of packet size using cut-through switching architecture and with features enabled. QSFP interface supports 1 microsecond latency. The hardware of 6001T is capable of supporting FCoE over 10G BASE-T interface.
The Cisco Nexus 6001T can be deployed in multiple scenarios - direct-attach 10 and 40 Gigabit Ethernet server access and high-density fabric extender aggregation deployments, leaf and spine designs, and compact aggregation - to build scalable Cisco Unified Fabric across a diverse set of physical and virtual server environments in the data center.
| Device Type | Switch - L3 - managed |
| Enclosure Type | Rack-mountable 1U |
| Subtype | 40 Gigabit Ethernet |
| Ports | 48 x 10GBase-T + 4 x 40 Gigabit QSFP+ |
| Performance | Forwarding performance: 1.28 Tbps |
| Capacity | Virtual interfaces (VLANs): 4096 ¦ ACL: 4000 ¦ IPv4 routes: 8000 ¦ IGMP groups: 8000 ¦ ARP entries: up to 256000 |
| MAC Address Table Size | 256K entries |
| Jumbo Frame Support | 9216 bytes |
| Routing Protocol | RIP-2, BGP, EIGRP, IGMPv2, HSRP, VRRP, OSPFv2, PIM-SM, IGMPv3, EIGRP for IPv6, OSPFv3, MSDP, static IPv4 routing, static IPv6 routing, ECMP |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI |
| Features | VLAN support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Virtual Route Forwarding-Lite (VRF-Lite), Equal-Cost Multipath (ECMP), Bidirectional Forwarding Detection (BFD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), DHCP relay, Link Aggregation Control Protocol (LACP), Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF) |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1Qbb, IEEE 802.1Qaz |
| Power | AC 100/230 V (50/60 Hz) |
| Power Redundancy | Yes |
| Dimensions (WxDxH) | 17.3 in x 30 in x 1.7 in |
| Weight | 31.97 lbs |
