JH402A - HP FlexFabric 5950 48SFP28 8QSFP28 Switch - New
Manufacturer: HPE / Hewlett Packard
Manufacturer Part #: JH402A
Condition: NEW
Availability: End of Life - Stock May Be Limited
HPE FlexFabric 5950 48SFP28 8QSFP28 - switch - 48 ports - managed - rack-mountable
The HPE FlexFabric 5950 Switch Series provides advanced features and high performance in a top-of-rack, data center switch architecture. Consisting of a 1U 32-port 100GbE QSFP28 switch, a fixed-port 48-port 25GbE SFP28 switch and a 4-slot chassis, the 5950 brings high density to a small footprint. While 10-unit IRF reduces management complexities by up to 88%, it also delivers <50 msec convergence time. You can rely on the FlexFabric 5950 Switch Series to improve switch utilization and lower TCO, while delivering business resilience and high availability.
| Device Type | Switch - 48 ports - L3 - managed |
| Enclosure Type | Rack-mountable 1U |
| Subtype | 25 Gigabit Ethernet |
| Ports | 48 x 25 Gigabit SFP28 + 8 x 100 Gigabit QSFP28 + 2 x 1 Gigabit / 10 Gigabit SFP+ |
| Performance | Latency (10 Gbps): 1 µs / Throughput: up to 2.796 Gpps / Routing/switching capacity: 3.2 Tbps |
| Capacity | Virtual interfaces (VLANs): 4096 / IPv4 routing table entries: 128000 / IPv6 routing table entries: 64000 |
| MAC Address Table Size | 136K entries |
| Jumbo Frame Support | 9416 bytes |
| Routing Protocol | OSPF, RIP, BGP-4, IS-IS, RIP-2, BGP, IGMP, VRRP, OSPFv3, static IPv6 routing, ECMP, RIPng, IS-ISv6, Bidirectional Forwarding Detection (BFD), BGP+ |
| Remote Management Protocol | SNMP 1, SNMP 2, Telnet, SNMP 3, SNMP 2c, SSH, CLI, SNMP 4 |
| Features | Flow control, DHCP support, packet filtering, port mirroring, Weighted Round Robin (WRR) queuing, Weighted Fair Queuing (WFQ), sFlow, Virtual Route Redundancy Protocol (VRRP) support, Quality of Service (QoS), Committed Access Rate (CAR), Device Link Detection Protocol (DLDP) support, LLDP support, Link Aggregation Control Protocol (LACP), Ingress Layer 2 MAC Access Control Lists (ACLs), Class of Service (CoS), Strict Priority (SP), reverse airflow support, 16MB packet buffer, In-Service Software Upgrade (ISSU), UDP shaping, Network Timing Protocol (NTP), Weighted Deficit Round Robin (WDRR) |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.1AX, IEEE 802.1Qaz, IEEE 802.3ag |
| Power | (50/60 Hz) |
| Power Redundancy | Optional |
| Dimensions (WxDxH) | 17.3 in x 21.3 in x 1.7 in |
| Weight | 33.07 lbs |